Command Reference Guide

3Com Router 5000 Family and Router 6000 Family qos cql queue serving ● 91
Command Reference
qos cql queue serving
Purpose Use the qos cql queue serving command to set the byte-count of the packets
sent from a given queue in each poll.
Use the
undo qos cql queue serving command to restore the byte-count of
sent packets to the default value.
Syntax qos cql cql-index queue queue-number serving byte-count
undo qos cql cql-index queue queue-number serving
Parameters cql-index
CQL index, ranging 1 to 16.
queue-number
Queue number, ranging 0 to 16.
byte-count
Number of bytes in packets that the given queue sends
in each poll, ranging 1 to 16,777,215 bytes. The
default setting is 1500 bytes.
Default By default, byte-count is 1500.
Example Specify byte-count of queue 2 in the CQL 5 to 1400.
[3Com ] qos cql 5 queue 2 serving 1400
View This command can be used in the following views:
■ System view
Related Commands ■ qos cql inbound-interface
■ qos cql protocol
■ qos fifo queue-length