Command Reference Guide

3Com Router 5000 Family and Router 6000 Family info-center source ● 205
Command Reference
info-center source
Purpose Use the info-center source command to add records to an information
channel.
Use the undo info-center source command to remove the records from the
information channel.
Syntax info-center source { module-name | default } { channel { channel-number
| channel-name} } [ log { state { on | off } | level severity }* | trap
{ state { on | off } | level severity } * | debug { state { on | off }
| level severity }* ]*
undo info-center source { module-name | default } { channel {
channel-number | channel-name }
Parameters module-name
Module name.
default
Includes all modules by default.
channel-number
Information channel number to be set.
channel-name
Information channel name to be set.
log
Log information.
trap
Trap information.
debug
Debugging information.
on
Enables outputting information.
off
Disables outputting information.
level
Sets information level to disable the info-center to
output information at this or higher level.
severity
Information level. As shown in the following table, the
info-center divides information into eight levels by
severity or emergency, with a lower level indicating an
event more emergent event. Level 1 represents
emergencies and level 8 represents debugging.
Table 37 Definition of information level
Severity level Descriptions
1. Emergencies The extremely emergent errors
2. Alerts The errors that need to be corrected immediately.
3. Critical Critical errors
4. Errors The errors that need concerns but not critical
5. Warnings Warning, there might exist some kinds of errors.
6. Notifications The information should be concerned.
7. Informational Common prompt information
8. Debugging Debugging information
*: Indicates to select from multiple options, at least one and
at most all.