Command Reference Guide

3Com Router 5000 Family and Router 6000 Family if-match outbound-interface ● 63
Command Reference
if-match outbound-interface
Purpose Use the if-match outbound-subinterface command to define an outbound
subinterface matching rule for the class.
Use the
undo if-match inboud-subinterface command to delete an
outbound subinterface matching rule from the class.
Syntax if-match [ not ] outbound-subinterface interface-type
interface-number.subinterface-number
undo if-match [ not ] outbound-subinterface interface-type
interface-number.subinterface-number
Parameters interface-type
Interface type, which must support subinterfaces. It
can be GE, FE, FR, or MFR only at present.
interface-number.subinterf
ace-number
Subinterface number.
Example Define an outbound subinterface matching rule for class1.
[3Com ] traffic classifier class1
[3Com -classifier-class1] if-match outbound-subinterface
GigabitEthernet6/0/0.1
View This command can be used in the following views:
■ Class view
Description The subinterface specified in this command must be one that already existed. After
this subinterface is deleted, the rule is deleted.
A policy containing a rule defined using this command must be applied to the main
interface where the specified subinterface is located. If the policy is applied to a
subinterface or to FR PVC, the rule cannot take effect.
Related Command traffic classifier