Command Reference Guide

3Com Router 5000 Family and Router 6000 Family if-match inbound-interface ● 59
Command Reference
if-match inbound-interface
Purpose Use the if-match inbound-interface command to define ingress interface
match rule of a class.
Use the
undo if-match inbound-interface command to delete ingress
interface match rule of a class.
Syntax if-match [ not ] inbound-interface interface-type interface-number
undo if-match [ not ] inbound-interface interface-type interface-number
Parameters interface-type
Interface type.
interface-number
Interface number.
Example Define that the class matches the packets entering from Ethernet6/0/0.
[3Com ] traffic classifier class1
[3Com -classifier-class1] if-match inbound-interface Ethernet6/0/0
View This command can be used in the following views:
■ Class view
Description Before specifying an interface, make sure that it has been created. If the specified
interface is a dynamic one, removing the interface can delete the rule.
Supported interface type: ATM, Ethernet, Serial, Tunnel, and VT.
Related Command traffic classifier