Command Reference Guide

3Com Router 5000 Family and Router 6000 Family info-center monitor channel ● 203
Command Reference
info-center monitor channel
Purpose Use the info-center monitor channel command to have the info-center
output information over the specified channel to the user terminal.
Use the undo info-center monitor channel command to cancel the current
setting.
Syntax info-center monitor channel { channel-number | channel-name }
undo info-center monitor channel
Parameters channel-number
Channel number. Valid values are 0 to 9. (The system
has 10 channels.)
channel-name
Channel name.
Default By default, no information is output to the user terminal.
Example Enable the info-center to output information to the user terminal and set the output
channel.
[3Com] info-center monitor channel monitor
View This command can be used in the following views:
■ System view
Description Only when the info-center is enabled can this command become effective.
Related Commands ■ info-center enable
■ display info-center