Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display traffic behavior ● 31
Command Reference
display traffic behavior
Purpose Use the display traffic behavior command to display the information of the
traffic behavior configured on the router.
Syntax display traffic behavior { system-defined | user-defined } [ behavior-name
]
Parameters system-defined
Behavior pre-defined by the system.
user-defined
Behavior pre-defined by the user.
behavior-name
Behavior name. If it is not specified, the information of
the behaviors pre-defined by the system or by the user
will be displayed.
Example Display information about user-defined traffic behavior.
[3Com ] display traffic behavior user-defined
User Defined Behavior Information:
Behavior: test
Assured Forwarding:
Bandwidth 30 (Kbps)
Discard Method: Tail
Queue Length : 64 (Packets)
General Traffic Shape:
CIR 30000 (bps), CBS 15000 (bit), EBS 0 (bit)
Queue length 50 (Packets)
Marking:
Remark MPLS EXP 3
Behavior: 3COM
Marking:
Remark IP Precedence 3
Committed Access Rate:
CIR 20000 (bps), CBS 15000 (bit), EBS 0 (bit)
Conform Action: pass
Exceed Action: discard
Expedited Forwarding:
Bandwidth 50 (Kbps) CBS 1500 (Bytes)
View This command can be used in the following views:
■ Any view