Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display qos policy interface ● 21
Command Reference
display qos policy interface
Purpose Use the display qos policy interface command to view the configuration
and operating state about the policy on the specified interface, on the specified PVC
on a particular ATM interface or on all interfaces and PVCs.
Syntax display qos policy interface [ interface-type interface-number ] [
inbound | outbound ] [ pvc { pvc-name [ vpi/vci ] | vpi/vci } ] ]
Parameters interface-type
Interface type.
interface-number
Interface number.
pvc
Used for ATM interface only, i.e., policy configuration
of specified PVC on specified ATM interface can be
displayed.
pvc-name
PVC name.
vpi/vci
VPI/VCI value pair. For details, refer to the parameter
description about the pvc command.
Example Display qos policy on Ethernet 1/0/0.
[3Com ] display qos policy interface Ethernet 1/0/0
Interface: Ethernet1/0/0
Direction: Outbound
Policy: test
Classifier: default-class
Matched : 0/0 (Packets/Bytes)
Rule(s) : if-match any
Behavior: be
Default Queue:
Flow Based Weighted Fair Queuing
Max number of hashed queues: 256
Matched : 0/0 (Packets/Bytes)
Enqueued : 0/0 (Packets/Bytes)
Discarded: 0/0 (Packets/Bytes)
Discard Method: Tail
Classifier: 3COM
Matched : 0/0 (Packets/Bytes)
Operator: AND
Rule(s) : if-match ip-precedence 5
Behavior: 3COM
Marking:
Remark IP Precedence 3
Remarked: 0 (Packets)
Committed Access Rate:
CIR 20000 (bps), CBS 15000 (bit), EBS 0 (bit)
Conform Action: pass
Exceed Action: discard