Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display qos policy ● 19
Command Reference
display qos policy
Purpose Use the display qos policy command to display the configuration information
of the specified class or all the classes and associated behaviors in the specified policy
or all policies.
Syntax display qos policy { system-defined | user-defined } [ policy-name [
classifier tcl-name ] ]
Parameters system-defined
Policy pre-defined by the system.
user-defined
Policy pre-defined by the user.
policy-name
Policy name. If it is not specified, the configuration
information of all the policies pre-defined by the
system or by the user will be displayed.
tcl-name
Class name in the policy.
Example Display information about user-defined policy.
[3Com ] display qos policy user-defined
User Defined QoS Policy Information:
Policy: test
Classifier: default-class
Behavior: be
-none-
Classifier: 3COM
Behavior: 3COM
Marking:
Remark IP Precedence 3
Committed Access Rate:
CIR 20000 (bps), CBS 15000 (bit), EBS 0 (bit)
Conform Action: pass
Exceed Action: discard
Expedited Forwarding:
Bandwidth 50 (Kbps) CBS 1500 (Bytes)
Classifier: database
Behavior: database
Assured Forwarding:
Bandwidth 30 (Kbps)
Discard Method: Tail
Queue Length : 64 (Packets)
General Traffic Shape:
CIR 30000 (bps), CBS 15000 (bit), EBS 0 (bit)
Queue length 50 (Packets)
Marking:
Remark MPLS EXP 3