Command Reference Guide

200 ● info-center loghost 3Com Router 5000 Family and Router 6000 Family
Command Reference
info-center loghost
Purpose Use the info-center loghost command to have the info-center output
information to the log host.
Use the undo info-center loghost command to cancel the current setting.
Syntax info-center loghost X.X.X.X [ channel { channel-number | channel-name }
| facility local-number | language { chinese | english } ] *
undo info-center loghost X.X.X.X
Parameters X.X.X.X
IP address of the log host.
channel
Information channel for the log host.
channel-number
Channel number. Valid values are 0 to 9. (The system
has 10 channels. )
channel-name
Channel name.
facility
Sets the logging tool of the log host.
local-number
Logging tool of the log host. Valid values are 0 to local
7.
language
Sets the logging language.
chinese, english
Logging language, which can be Chinese or English.
Default By default, no information is output to the log host.
Example Enable the info-center to send information to the UNIX workstation at 202.38.160.1.
[3Com] info-center loghost 202.38.160.1
View This command can be used in the following views:
■ System view
Description If not specified, the information channel for the log host defaults to channel 2 which
is named log host, the log host recording tool local-number to local 7, and the
language to english.
Only when the information center is enabled can this command become effective.
By setting the IP address of the log host, you can specify the information output
direction. You can set up to four log hosts.