Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display qos car interface ● 7
Command Reference
display qos car interface
Purpose Use the display qos car interface command to view parameter
configuration and running statistics of CAR at each or all interfaces.
Syntax display qos car interface [ interface-type interface-number ]
Parameters interface-type
Interface type.
interface-number
Interface number.
Example Display the CAR parameter configuration information and running statistic
information on each interface.
[3Com ] display qos car interface
Interface: Ethernet6/0/0
Direction: Inbound
Rule(s): If-match CARL 1
CIR 8000(Bps), CBS 15000(Bit), EBS 0(Bit)
Conform Action: remark ip-precedence 3 and pass
Exceed Action: remark ip-precedence 4 and continue
Conformed: 0/0 (Packets/Bytes)
Exceeded: 0/0 (Packets/Bytes)
Direction: Outbound
Rule(s): If-match ACL 2001
CIR 8000(Bps), CBS 15000(Bit), EBS 0(Bit)
Conform Action: pass
Exceed Action: discard
Conformed: 0/0(Packets/Bytes)
Exceeded: 0/0(Packets/Bytes)purpose_body
View This command can be used in the following views:
■ Any view
Description If no interface is specified, CAR configuration and running statistics of all interfaces
will be displayed.