Command Reference Guide

84 ● tunnel timer hello 3Com Router 5000 Family and Router 6000 Family
Command Reference
tunnel timer hello
Purpose Use the tunnel timer hello command to set a Hello packet forwarding interval.
Use the undo tunnel timer hello command to restore Hello packet forwarding
interval in the tunnel to the default.
Syntax tunnel timer hello hello-interval
undo tunnel timer hello
Parameters hello-interval
The forwarding interval (in seconds) of a Hello packet
when LAC or LNS has no packet to receive. Valid
values are 60 to 1000 seconds.
If not specified, the default forwarding interval is 60
seconds.
Example Set Hello packet forwarding interval to 99 seconds.
[3Com-l2tp1] tunnel timer hello 99
View This command can be used in the following views:
■ L2TP Group view
Description Different Hello packet time intervals can be configured on LNS and LAC sides.