Command Reference Guide

198 ● info-center logbuffer 3Com Router 5000 Family and Router 6000 Family
Command Reference
info-center logbuffer
Purpose Use the info-center logbuffer command to enable the log buffer and specify
the channel for system information output as well as the size of the log buffer.
Use the undo info-center logbuffer command to cancel the current settings.
Syntax info-center logbuffer [ channel { channel-number | channel-name } |
size buffersize ] *
undo info-center logbuffer [ channel | size ]
Parameters channel
Sets the channel for outputting information to the log
buffer.
channel-number
Channel number. Valid values are 0 to 9. (The system
has 10 channels.)
channel-name
Channel name.
size
Sets log buffer size.
buffersize
Size of the log buffer (the message entries that can be
accommodated).
Default By default, information output to the log buffer is allowed and log buffer size is 512.
Example Enable the info-center to send information to the log buffer and set the log buffer
size to 50.
[3Com] info-center logbuffer size 50
View This command can be used in the following views:
■ System view
Description Only when the info-center is enabled can this command become effective.
By setting channel number after enabling log buffer, you can specify information
output direction.
Related Commands ■ info-center enable
■ display info-center