Command Reference Guide

3Com Router 5000 Family and Router 6000 Family tunnel keepstanding ● 79
Command Reference
tunnel keepstanding
Purpose Use the tunnel keepstanding command to enable the tunnel-hold function of
L2TP, preventing the tunnel from being disconnected when no session is present.
Use the undo tunnel keepstanding command to disable the tunnel-hold
function of L2TP.
Syntax tunnel keepstanding
undo tunnel keepstanding
Parameters None
Example Enter L2TP group view.
[3Com] l2tp-group 1
Enable the tunnel-hold function of L2TP.
[3Com-l2tp1] tunnel keepstanding
View This command can be used in the following views:
■ L2TP Group view
Description CAUTION:
To have this command take effect on a tunnel, you must configure it at both ends of
the tunnel.