Command Reference Guide

3Com Router 5000 Family and Router 6000 Family l2tp enable ● 73
Command Reference
l2tp enable
Purpose Use the l2tp enable command to enable the L2TP function.
Use the undo l2tp enable command to disable the L2TP function.
Syntax l2tp enable
undo l2tp enable
Parameters None
Default By default, the L2TP function is disabled.
Example Enable the L2TP function on the router.
[3Com] l2tp enable
View This command can be used in the following views:
■ System view
Description This command and its undo form are used to enable and disable the L2TP function.
Only when this function is enabled, can the L2TP service be implemented.
Related Command: l2tp-group