Command Reference Guide

3Com Router 5000 Family and Router 6000 Family info-center enable ● 197
Command Reference
info-center enable
Purpose Use the info-center enable command to enable the info-center.
Use the undo info-center enable command to disable the info-center.
Syntax info-center enable
undo info-center enable
Parameters None
Default By default, the info-center is enabled.
Example Enable the info-center.
[3Com] info-center enable
% information center is enabled
View This command can be used in the following views:
■ System view
Description Only when the info-center is enabled can the system output information.
Related Commands ■ info-center loghost
■ info-center logbuffer
■ info-center trapbuffer
■ info-center console channel
■ info-center monitor channel
■ display info-center