Command Reference Guide

66 ● session setup-interval 3Com Router 5000 Family and Router 6000 Family
Command Reference
session setup-interval
Purpose Use the session setup-interval command to set the interval for sending
requests to establish a session (Setup request). Setup request packets are sent
regularly until the session is established.
Use the undo session setup-interval command to revert to the default
setup interval.
Syntax session setup-interval time-interval
undo session setup-interval
Parameters time-interval
Interval for sending requests to establish a session.
Valid values for this argument range from 5 seconds to
60 seconds.
If no value is specified, the default is 10 seconds.
Example Set the interval for sending requests to 30 seconds.
[3Com-dvpn-policy-abc] session setup-interval 30
View This command can be used in the following views:
■ Dvpn-Policy view
Description A client takes count of the Setup request packets it sends. If it does not receive the
response packets from the peer when the setup interval expires after it sends s Setup
request packet, it sends another Setup request packet.