Command Reference Guide

3Com Router 5000 Family and Router 6000 Family session idle-time ● 63
Command Reference
session idle-time
Purpose Use the session idle-time command to set the L2TP session idle-timeout timer.
Upon expiration of this timer, the L2TP session is disconnected.
Use the undo session idle-time command to disable the idle-timeout timer.
Syntax session idle-time time
undo session idle-time
Parameters time
Timeout period (in seconds). Valid values are 0 to
10000 seconds.
If not specified the default is 0, meaning the session
never expires.
Default By default the 2TP session never expires.
Example Enter L2TP group view.
[3Com] l2tp-group 1
Set the L2TP session idle-timeout timer to 600 seconds.
[3Com] session idle-time 600
View This command can be used in the following views:
■ L2TP Group view