Command Reference Guide

62 ● session algorithm-suite 3Com Router 5000 Family and Router 6000 Family
Command Reference
session algorithm-suite
Purpose Use the session algorithm-suite command to specify the algorithm suite a
session uses.
Use the undo session algorithm-suite command to revert to the default
algorithm suite.
Syntax session algorithm-suite suite-number
undo session algorithm-suite
Parameters suite-number
Algorithm suite number. Valid values are 0 to 12.
If no value is specified, the default is 1.
This argument stands for the algorithm suite used to
encrypt session control packets, whose available values
are described as follows:
■ 0 Without protection
■ 1 DES_MD5_DHGROUP1
■ 2 DES_MD5_DHGROUP2
■ 3 DES_SHA1_DHGROUP1
■ 4 DES_SHA1_DHGROUP2
■ 5 3DES_MD5_DHGROUP1
■ 6 3DES_MD5_DHGROUP2
■ 7 3DES_SHA1_DHGROUP1
■ 8 3DES_SHA1_DHGROUP2
■ 9 AES128_MD5_DHGROUP1
■ 10 AES128_MD5_DHGROUP2
■ 11 AES128_SHA1_DHGROUP1
■ 12 AES128_SHA1_DHGROUP2
Example Set not to encrypt control packets, that is, set the suit number to 0.
[3Com-dvpn-policy-abc] session algorithm-suite 0
View This command can be used in the following views:
■ Dvpn-Policy view
Description Algorithm suite 1 is used by default, which stands for DES (for encryption), MD5 (for
authentication), and DHGROUP1 (for key negotiation).