Command Reference Guide

46 ● interface virtual-template 3Com Router 5000 Family and Router 6000 Family
Command Reference
interface virtual-template
Purpose Use the interface virtual-template command to create a virtual template.
Use the undo interface virtual-template command to delete the virtual
template.
Syntax interface virtual-template virtual-template-number
undo interface virtual-template virtual-template-number
Parameters virtual-template-number
The number of a virtual template. Valid values are any
integer from 0 to1023.
Default By default, no virtual template is created.
Example Create virtual template 1 and enter its view.
[3Com] interface virtual-template 1
View This command can be used in the following views:
■ System view
Description Virtual templates are mainly used to configure parameters of the virtual interfaces
dynamically created by the router in operation, such as MP interfaces (bundled logical
interfaces) and L2TP logical interfaces.
Related Command: allow l2tp