Command Reference Guide

194 ● hwping-server udpecho 3Com Router 5000 Family and Router 6000 Family
Command Reference
hwping-server udpecho
Purpose Use the hwping-server udpecho command to create a UDP listening service.
Use the undo hwping-server udpecho command to delete the established UDP
listening service.
Syntax hwping-server udpecho ip-address port-number
undo hwping-server udpecho ip-address port-number
Parameters ip-address
IP address where HWPing server provides the UDP
listening service.
port-number
Port where HWPing Server provides the UDP listening
service. This port number must be smaller than 49,999
and could not be that of a port that is well-known or
has a special purpose, such as port 1701.
Example Create a UDP listening service, setting IP address to 169.254.10.2 and port number to
9000.
[Router] hwping-server udpecho 169.254.10.2 9000
View This command can be used in the following views:
■ System view
Description If you want to use a 3Com router as the server in an HWPing test on the UDP
connection of a specified port, you must create the UDP listening service on the
server.
Related Command hwping-server enable