Command Reference Guide

3Com Router 5000 Family and Router 6000 Family dvpn server authentication-client method ● 39
Command Reference
dvpn server authentication-client method
Purpose Use the dvpn server authentication-client method command to specify
the default way a DVPN server authenticates clients.
Syntax dvpn server authentication-client method { chap | none | pap }
Parameters none
Specifies the DVPN server not to authenticate clients.
pap
Specifies the DVPN server to authenticate clients by
using PAP (password authentication protocol).
chap
Specifies the DVPN server to authenticate clients by
using CHAP (challenge authentication protocol).
Example Specify CHAP as the default way to authenticate clients.
[3Com] dvpn server authentication-client method chap
View This command can be used in the following views:
■ System view
Description If the DVPN domain to be accessed is not specified when a client registers with a
DVPN server, the DVPN server authenticates the client in the default way. None,
CHAP, and PAP are available for authentication at present.
A DVPN server determines the way to authenticate clients according to the policy
applied to the DVPN domain. If the corresponding policy does not exist, the DVPN
server adopts the authentication in global configuration to authenticate clients.
A DVPN server authenticates clients by using the default PAP.