Command Reference Guide

38 ● dvpn server 3Com Router 5000 Family and Router 6000 Family
Command Reference
dvpn server
Purpose Use the dvpn server command to configure the DVPN class to be applied to a
tunnel interface.
Use the undo dvpn server command to remove the DVPN class applied to a
tunnel interface.
Syntax dvpn server dvpn-class-name
undo dvpn server dvpn-class-name
Parameters dvpn-class-name
Name of the DVPN class to be applied to the tunnel
interface. A DVPN class is a data structure that
contains information such as the public IP address at
the DVPN server side, private (tunnel) IP address, user
name and password. You can create a DVPN class by
executing the dvpn class command in system view.
Default A tunnel interface is not configured with a DVPN class by default.
Example Apply the DVPN class named abc to the tunnel interface.
[3Com-Tunnel0] dvpn server abc
View This command can be used in the following views:
■ Tunnel interface view
Description At present, a tunnel interface can support only one DVPN server, and a DVPN class
can only be applied to one tunnel interface.