Command Reference Guide

32 ● dvpn dvpn-id 3Com Router 5000 Family and Router 6000 Family
Command Reference
dvpn dvpn-id
Purpose Use the dvpn dvpn-id command to specify the DVPN domain the tunnel interface
belongs to. This command is valid when the tunnel interface is encapsulated as DVPN.
Use the undo dvpn dvpn-id command to remove the DVPN domain ID assigned
to the tunnel interface.
Syntax dvpn dvpn-id dvpn-id
undo dvpn dvpn-id
Parameters dvpn-id
ID number of the DVPN domain. Valid values are 1 to
65,535.
Default No DVPN domain ID is assigned to a tunnel interface by default.
Example Set the ID of the DVPN domain the tunnel interface belongs to the to 100.
[3Com] int tunnel 0
[3Com-Tunnel0] dvpn-protocol udp dvpn
[3Com-Tunnel0] dvpn dvpn-id 100
View This command can be used in the following views:
Tunnel Interface view
Related Command: tunnel-protocol dvpn