Command Reference Guide

3Com Router 5000 Family and Router 6000 Family hwping-server tcpconnect ● 193
Command Reference
hwping-server tcpconnect
Purpose Use the hwping-server tcpconnect command to create a TCP listening
service.
Use the undo hwping-server tcpconnect command to delete the established
TCP listening service.
Syntax hwping-server tcpconnect ip-address port-number
undo hwping-server tcpconnect ip-address port-number
Parameters ip-address
IP address where HWPing Server provides the TCP
listening service.
port-number
Port where HWPing Server provides the TCP listening
service. This port number cannot be greater than
50,000 or be one reserved for special purpose such as
1701.
Example Create a TCP listening service, setting IP address to 169.254.10.2 and port number to
9000.
[Router] hwping-server tcpconnect 169.254.10.2 9000
View This command can be used in the following views:
■ System view
Description When you use a 3Com router as the server in an HWPing test on the TCP connection
of a specified port, you must create the TCP listening service on the server.
Related Command hwping-server enable