Command Reference Guide

28 ● dvpn class 3Com Router 5000 Family and Router 6000 Family
Command Reference
dvpn class
Purpose Use the dvpn class command to create and enter a dvpn-class view.
Use the undo dvpn class command to remove a dvpn-class view.
Syntax dvpn class dvpn-class-name
undo dvpn class
Parameters dvpn-class-name
Name of the DVPN class to be created, consisting of a
string with a maximum of 31 characters.
Default No dvpn-class is configured by default.
Example Create a DVPN class named abc.
[3Com] dvpn class abc
View This command can be used in the following views:
■ System view
Description Parameters such as the IP address of the DVPN server and the user name and
password for register are configured in DVPN class views. You cannot remove a DVPN
class applied to a tunnel interface.