Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display l2tp tunnel ● 25
Command Reference
display l2tp tunnel
Purpose Use the display l2tp tunnel command to view information of the current
L2TP tunnels.
Syntax display l2tp tunnel
Parameters None
Example Display information of the current L2TP tunnels.
<3Com> display l2tp tunnel
LocalTID RemoteTID RemoteAddress Port Sessions RemoteName keepstand
2 22849 11.1.1.1 1701 1 lns YES
Total tunnel = 1
View This command can be used in the following views:
■ Any view
Description The output information of the command facilitates the user to learn information of
the current L2TP tunnels.
Related Command display l2tp session
Table 1 Description on the fields of the display L2tp tunnel command
Field Description
Total tunnels Number of tunnels
LocalTID The number uniquely identifies the local tunnel
RemoteTID The number uniquely identifies the peer tunnel
Remote Name Name of the peer end
RemoteAddress IP address of the peer end
Port Port number of the peer end
Sessions Number of sessions on the tunnel
Remote Name Name of the peer
KeepStand State of the tunnel-hold function