Command Reference Guide

192 ● hwping-server enable 3Com Router 5000 Family and Router 6000 Family
Command Reference
hwping-server enable
Purpose Use the hwping-server enable command to enable HWPing Server.
Use the undo hwping-server enable command to disable HWPing Server.
Syntax hwping-server enable
undo hwping-server enable
Parameters None
Default By default, HWPing Server is disabled.
Example Enable HWPing Server.
[Router] hwping-server enable
View This command can be used in the following views:
■ System view
Description You may use HWPing to test jitter, or UDP or TCP connection of a specified port. Note
that if a 3Com router is used as the server in an HWPing test, you must enable
HWPing on the server.
Related Commands ■ hwping-agent enable
■ hwping-server tcpconnect
■ hwping-server udpecho