Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display dvpn session ● 19
Command Reference
display dvpn session
Purpose Use the display dvpn session command to display information about sessions
the device owns.
Syntax display dvpn session { all | dvpn-id dvpn-id [ private-ip private-ip ]
}
Parameters all
Displays all the established session information.
dvpn-id dvpn-id
ID of the DVPN domain. Valid values are 1 to 65,535.
private-ip private-IP
Specifies the private IP address (the IP address of the
tunnel interface).
Example Display all the session information about DVPN 2.
<3Com> display dvpn session dvpn-id 2
vpn-id private-ip public-ip port state type
-------------------------------------------------------------
2 11.0.0.2 211.1.1.2 9876 SUCCESS C->S
2 11.0.0.4 211.1.1.100 12289 SUCCESS C->C
View This command can be used in the following views:
■ Any view