Command Reference Guide

16 ● display dvpn ipsec-sa 3Com Router 5000 Family and Router 6000 Family
Command Reference
display dvpn ipsec-sa
Purpose Use the display dvpn ipsec-sa command to display the specified IPSec SA
information.
Syntax display dvpn ipsec-sa { all | dvpn-id dvpn-id [ private-ip private-ip ] }
Parameters all
Specifies all the information about IPSec SA.
dvpn-id
ID number of the DVPN domain. Valid values are 1 to
65,535.
private-ip
Specifies the private IP address.
Example Display the IPSec SA information about DVPN 1.
<3Com> display dvpn ipsec-sa dvpn-id 1
---------------------------
Session dvpn-id : 1
Session local : 10.0.0.3
Session remote : 10.0.0.2
sa mode : DVPN
---------------------------
[Inbound ESP SAs]
spi : 1549550209 (0x5c5c4281)
authentication-algorithm : ESP-AUTH-MD5
encryption-algorithm : ESP-ENCRYPT-3DES
life duration(bytes/sec): 0/180
remaining life duration(bytes/sec): 0/102
[Outbound ESP SAs]
spi : 2421434273 (0x905427a1)
authentication-algorithm : ESP-AUTH-MD5
encryption-algorithm : ESP-ENCRYPT-3DES
life duration(bytes/sec): 0/180
remaining life duration(bytes/sec): 0/102
View This command can be used in the following views:
■ Any view