Command Reference Guide

14 ● display dvpn info 3Com Router 5000 Family and Router 6000 Family
Command Reference
display dvpn info
Purpose Use the display dvpn info command to display the configuration and operating
information about a specified DVPN.
Use the display dvpn info global command to display the global
configuration and operating information about the current DVPN.
Syntax display dvpn info { dvpn-id dvpn-id | global }
Parameters dvpn-id
ID number of the DVPN domain. Valid values are 1 to
65,535.
global
Displays the global configuration information about
DVPN.
Example Display all the information about DVPN 1.
[3Com] display dvpn info vpn-id 1
---------------------------------------------------
DVPN Domain 1 Information
---------------------------------------------------
type : client
register type : Undistributed | Forward
session number : 1
server : server0
server state : active
server public IP : 211.1.1.2
algorithm suite : DES_MD5_DHGROUP1
session encryption flag : Need encryption
data encryption flag : Need encryption
authentication server method : none
session algorithm suite : AES128_SHA1_DHGROUP1
session setup time : 10
session idle time : 300
session keepalive time : 10
data algorithm suite : 3DES_MD5_DHGROUP2
data ipsecsa duration time : 180
data ipsecsa duration byte : 0
input packets : 17160
input dropped packets : 0
output packets : 87
output direct send packets : 42
output error dropped packets : 3
output send ipsec packets : 42
output send ipsec fail packets : 0
Display the global configuration about DVPN.
[3Com] display dvpn info global