Command Reference Guide

3Com Router 5000 Family and Router 6000 Family debugging l2tp ● 11
Command Reference
debugging l2tp
Purpose Use the debugging l2tp command to enable L2TP debugging.
Use the undo debugging l2tp command to disable L2TP debugging.
Syntax debugging l2tp { all | control | dump | error | event | hidden | payload
| time-stamp }
undo debugging l2tp { all | control | error | event | hidden | payload |
time-stamp }
Parameters all
Enables all L2TP debugging.
control
Enables control packet debugging.
dump
Enables PPP packet debugging.
error
Enables error debugging.
event
Enables event debugging.
hidden
Enables hidden AVP debugging.
payload
Enables L2TP payload debugging.
time-stamp
Enables time-stamp debugging.
Example Enable all L2TP debugging.
<3Com> debugging l2tp all
View This command can be used in the following views:
■ System view