Command Reference Guide

10 ● debugging dvpn 3Com Router 5000 Family and Router 6000 Family
Command Reference
debugging dvpn
Purpose Use the debugging dvpn command to enable DVPN debugging.
Use the undo debugging dvpn command to disable DVPN debugging.
Syntax debugging dvpn { all | error | event { all | misc | register | session
} | hexadecimal | packet { all | control | data | ipsec } }
undo debugging dvpn { all | error | event { all | register | session
| misc } | hexadecimal | packet { all | control | data | ipsec } }
Parameters all
Enables all types of DVPN debugging.
error
Enables debugging for DVPN errors.
event
Enables debugging for DVPN events, such as register
events, session events, and misc events.
hexadecimal
Enables debugging for hexadecimal packets.
packet
Enables debugging for DVPN packets, such as control
packets, data, and IPSec packets.
Default DVPN debugging is disabled by default.
Example Enable debugging for DVPN register events.
[3Com] debugging dvpn event register
View This command can be used in the following views:
■ User view