Command Reference Guide

3Com Router 5000 Family and Router 6000 Family web url-filter host default ● 321
Command Reference
web url-filter host default
Purpose Use the web url-filter host default command to permit or deny the
packets that do not match with the addresses configured by the administrator.
Syntax web url-filter host default { permit | deny }
Parameters permit
The default filtering operation is permit.
deny
The default filtering operation is deny.
Default By default, the unmatched packet is permitted.
Example Configure the default filtering operation to permit.
<3Com> system-view
[3Com] web url-filter host default permit
View This command can be used in the following views:
■ System view