Command Reference Guide

318 ● web url-filter host acl-number 3Com Router 5000 Family and Router 6000 Family
Command Reference
web url-filter host acl-number
Purpose Use the web url-filter host acl-number command to configure that the
firewall uses ACL to filter the web requests whose destination URL address is an IP
address. The command is effective only after the function of URL address filtering
support for IP address is enabled. Only one ACL rule can be referenced when this
command is executed, and the new settings will replace the old settings.
Use the undo web url-filter host acl-number command to delete the
configured rule.
Syntax web url-filter host acl-number number
undo web url-filter host acl-number
Parameters number
ACL number. Valid values are 3000 to 3999.
Default By default, no filtering rule is configured.
Example Configure to only allow the web request whose destination IP address conforms with
the ACL rule 3001 to pass.
<3Com> system-view
[3Com] acl number 3001
[Quidway-acl-adv-3001] rule 0 permit ip destination 200.1.1.0 0.0.0.255
[Quidway-acl-adv-3001] rule 1 deny ip
[Quidway-acl-adv-3001] quit
[3Com] web url-filter host acl-number 3001
View This command can be used in the following views:
■ System view