Command Reference Guide

188 ● http-operation 3Com Router 5000 Family and Router 6000 Family
Command Reference
http-operation
Purpose Use the http-operation command to configure an HTTP operation type.
Syntax http-operation { get | post }
Parameters get
Obtains data from an HTTP server.
If no other operation is specified, get is the default.
post
Sends data to an HTTP server.
Example Set the HTTP test operation type to get.
[Router-administrator-http] http-operation get
View This command can be used in the following views:
■ HWPing Test Group view
Description HTTP operation includes get and post, where get is to obtain data from an HTTP
server and post is to send data to the HTTP server.
This command applies only to HTTP test.
Related Command http-string