Command Reference Guide

3Com Router 5000 Family and Router 6000 Family user-name-format ● 307
Command Reference
user-name-format
Purpose Use the user-name-format command to configure the format of the username to
be sent to a RADIUS server.
Syntax user-name-format { with-domain | without-domain }
Parameters with-domain
Includes the ISP domain name in the username sent to
the RADIUS server.
without-domain
Excludes the ISP domain name from the username sent
to the RADIUS server.
Default By default, ISP domain name is included in the username.
Example Send the username without the domain name to the RADIUS servers in the RADIUS
scheme "3Com".
[3Com-radius-3Com] user-name-format without-domain
View This command can be used in the following views:
■ RADIUS view
Description The supplicants are generally named in the userid@isp-name format, of which
isp-name is used by the router to decide the ISP domain to which a supplicant
belongs. Some earlier RADIUS servers however, cannot recognize usernames
including an ISP domain name. Before sending a username including a domain name
to such a RADIUS server, the router must remove the domain name. This command is
thus provided for you to decide whether to include a domain name in a username to
be sent to a RADIUS server.
If a RADIUS scheme defines that the username is sent without the ISP domain name,
do not apply the RADIUS scheme to more than one ISP domains, thus avoiding the
confused situation where the RADIUS server regards two users in different ISP
domains but with the same userid as one.
Related Command radius scheme