Command Reference Guide

3Com Router 5000 Family and Router 6000 Family use encrypt-card ● 305
Command Reference
use encrypt-card
Purpose Use the use encrypt-card command to specify the SA proposal uses the
encryption card at a designated slot.
Use the undo use encrypt-card command to remove the configuration.
Syntax use encrypt-card [ slot-id ]
undo use encrypt-card [ slot-id ]
Parameters slot-id
Slot ID for the encryption card, whose range depends
on the slot number on the router. It is in 3-dimentional
format, for example,
x/y/z, where x stands for slot ID
on the router, y and z are fixed to 0 for the encryption
card.
Example Configure the slot holding the encryption card used by the encryption card SA
proposal named card.
[Router] ipsec card-proposal card
[Router-ipsec-card-proposal] use encrypt-card 5/0/0
View This command can be used in the following views:
■ Card SA Proposal view
Description One SA proposal can only be processed by a single encryption card, but one single
encryption card can process different SA proposals.
Related Command ipsec card-proposal