Command Reference Guide

3Com Router 5000 Family and Router 6000 Family history-records ● 187
Command Reference
history-records
Purpose Use the history-records command to configure the number of test results that
the system can retain.
Use the undo history-records command to restore the default.
Syntax history-records number
undo history-records
Parameters number
Number of test results allowed to be retained. Valid
values are 0 to 50.
If no value is specified, the default is 50.
Example Set the number of retained history records concerning the current test group to 10.
[Router-administrator-icmp] history-records 10
View This command can be used in the following views:
■ HWPing Test Group view