Command Reference Guide

3Com Router 5000 Family and Router 6000 Family timer response-timeout ● 299
Command Reference
timer response-timeout
Purpose Use the timer response-timeout command to configure the RADIUS server
response timer.
Use the undo timer response-timeout command to restore the default.
Syntax timer response-timeout seconds
undo timer response-timeout
Parameters seconds
RADIUS server response timeout timer. Valid values are
1 to 10 seconds.
If no value is specified, the default value is 3.
Example Set the response timeout timer in the RADIUS scheme 3Com to 5 seconds.
[3Com-radius-3Com] timer response-timeout 5
View This command can be used in the following views:
■ RADIUS view
Description If the NAS receives no response from the RADIUS server after sending a RADIUS
request (authentication/authorization or accounting request) for a period, the NAS
resends the request, thus ensuring the user can obtain the RADIUS service. You can
specify this period by setting the RADIUS server response timeout timer, taking into
consideration the network condition and the desired system performance.
Related Commands ■ radius scheme
■ retry