Command Reference Guide

186 ● history-record 3Com Router 5000 Family and Router 6000 Family
Command Reference
history-record
Purpose Use the history-record enable command to enable history record.
Use the undo history-record enable command to disable history record.
Syntax history-record enable
undo history-record enable
Parameters None
Example Enable history record saving.
<3Com> system-view
[3Com] hwping 1 1
[3Com-hwping-1-1] history-record enable
View This command can be used in the following views:
■ HWPing test group view
Description Use the display hwping history command to view the history record, but by
default, history record is disabled. You should configure to save history record as
needed.
■ If you need to save history record, enable it.
■ If you disable the history record after enabling it, the saved history record will be
deleted and the maximum number of the history record for you to save will not be
changed.
■ If you do not need to save history record, disable it. At this time you can also
configure the number of the history record to be saved, but the history record will
not be saved.
■ When you are performing a test, the system prompts that parameter is not
allowed to be configured; otherwise, the system prompts "Test is in progress, can’t
change the parameter.".