Command Reference Guide

292 ● time-out 3Com Router 5000 Family and Router 6000 Family
Command Reference
time-out
Purpose Use the time-out command to configure the time waiting for a DPD
acknowledgement.
Use the undo time-out command to restore the default.
Syntax time-out seconds
undo time-out
Parameters seconds
Time waiting for a DPD acknowledgement (in
seconds). Valid values are 1 to 60.
If no value is specified, the default is 5 seconds.
Example Set time-out to two seconds.
[3Com-ike-dpd-aaa] time-out 2
Reset time-out to five seconds.
[3Com-ike-dpd-aaa] undo time-out
View This command can be used in the following views:
■ DPD Structure view