Command Reference Guide

3Com Router 5000 Family and Router 6000 Family stop-accounting-buffer enable ● 291
Command Reference
stop-accounting-buffer enable
Purpose Use the stop-accounting-buffer enable command to enable the router to
buffer the stop-accounting requests that have no responses.
Use the undo stop-accounting-buffer enable command to disable the
router to buffer the stop-accounting requests that have no responses.
Syntax stop-accounting-buffer enable
undo stop-accounting-buffer enable
Parameters None
Default By default, the router is enabled to buffer the stop-accounting requests that have no
responses.
Example In the RADIUS scheme “3Com”, enable the router to buffer the stop-accounting
requests that have no responses.
[3Com-radius-3Com] stop-accounting-buffer enable
View This command can be used in the following views:
■ RADIUS view
Description Since the stop-accounting packet affects the charge to a user, it has importance for
both users and ISPs. Therefore, the NAS makes its best effort to send every
stop-accounting request to RADIUS accounting servers. If receiving no response after
a specified period of time, the NAS buffers and resends the packet until receiving a
response or discards the packet when the number of transmission retries reaches the
configured limit.
Related Commands ■ display stop-accounting-buffer
■ radius scheme
■ reset stop-accounting-buffer