Command Reference Guide

290 ● state 3Com Router 5000 Family and Router 6000 Family
Command Reference
state
Purpose Use the state command to configure the state of the current ISP domain or local
user.
Syntax state { active | block }
Parameters active
Configured to allow users in the current ISP domain or
the current local user to request for network services.
block
Configured to block users in the current ISP domain or
the current local user to request for network services.
Default By default, both ISP domain (in ISP domain view) and local user (in local user view) are
in the active state upon their creation (in ISP domain view.
Example Set the state of the current ISP domain "3Com163.net" to block. The supplicants in
this domain cannot request for network services.
[3Com-isp-3Com163.net] state block
Set the state of the user "3Com1" to block.
[3Com-luser-3Com1] state block
View This command can be used in the following views:
■ ISP Domain view
■ Local User view
Description Every ISP domain can be active or blocked. If an ISP domain is configured to be active,
the supplicants in it can request for network services; whereas in the block state, its
users are disallowed to request for any network service, which does not affect the
users currently online. This also applies to local users.
Related Command domain