Command Reference Guide

286 ● snmp-agent trap enable encrypt-card 3Com Router 5000 Family and Router 6000 Family
Command Reference
snmp-agent trap enable encrypt-card
Purpose Use the snmp-agent trap enable encrypt-card command to enable SNMP
agent trap function on the encryption card.
Use the undo snmp-agent trap enable encrypt-card command to disable
SNMP agent trap function on the card.
Syntax snmp-agent trap enable encrypt-card
undo snmp-agent trap enable encrypt-card
Parameters None
Default By default, the function is enabled.
Example Enable the trap function on the encryption card.
[Router] snmp-agent trap enable encrypt-card
View This command can be used in the following views:
■ System view
Description When combined with appropriate NM configuration, the trap function allows you to
view information about card reboot, state transition and packet loss processing on
the Console of the NM station or router.