Command Reference Guide

282 ● server type 3Com Router 5000 Family and Router 6000 Family
Command Reference
server type
Purpose Use the server-type command to configure the RADIUS server type supported by
the router.
Syntax server-type { 3Com | standard | portal }
Parameters 3Com
Specifies the RADIUS server of 3Com type (generally
CAMS), which requires the RADIUS client (router
system) and RADIUS server to interact according to the
procedures and packet format provisioned by the
private RADIUS protocol of 3Com Corporation.
standard
Specifies the RADIUS server of Standard type, which
requires the RADIUS client end (router system) and
RADIUS server to interact according to the regulation
and packet format of standard RADIUS protocol (RFC
2138/2139 or newer).
Standard is the default server-type value.
portal
Specifies the RADIUS server of portal type.
Example Set RADIUS server type of RADIUS scheme 3Com to 3Com.
[3Com-radius-3Com] server-type 3Com
View This command can be used in the following views:
■ RADIUS view
Related Command radius scheme