Command Reference Guide

276 ● secondary authentication 3Com Router 5000 Family and Router 6000 Family
Command Reference
secondary authentication
Purpose Use the secondary authentication command to configure the IP address and
port number of the secondary RADIUS authentication/authorization/accounting
server.
Use the undo secondary authentication command to restore the IP address
and port number to the defaults.
Syntax secondary authentication ip-address [ port-number ]
undo secondary authentication
Parameters ip-address
IP address in dotted decimal format. By default, the IP
address of the secondary authentication/authorization
server is 0.0.0.0.
port-number
UDP port number. Valid values are 1 to 65535.
If no value is specified, the default
authentication/authorization service is provided
through UDP 1812.
Example Set IP address of the secondary authentication/authorization server in the RADIUS
scheme “3Com” to 10.110.1.2 and use the UDP port 1812 to provide the RADIUS
authentication/authorization service.
[3Com-radius-3Com] secondary authentication 10.110.1.2 1812
View This command can be used in the following views:
■ RADIUS view
Related Commands ■ primary authentication
■ radius scheme
■ state