Command Reference Guide

3Com Router 5000 Family and Router 6000 Family secondary accounting ● 275
Command Reference
secondary accounting
Purpose Use the secondary accounting command to configure a secondary TACACS
accounting server.
Use the undo secondary accounting command to delete the configured
secondary
Syntax secondary accounting ip-address [ port ]
undo secondary accounting
Parameters ip-address
IP address of the server, a valid unicast address in
dotted decimal format.
port
Port number of the server. Valid values are 1 to 65535.
If no value is specified, the default is 49.
Default By default, IP address of TACACS accounting server is all zeros.
Example Configure a secondary accounting server.
[3Com] hwtacacs scheme test1
[3Com-hwtacacs-test1] secondary accounting 10.163.155.12 49
View This command can be used in the following views:
■ HWTACACS view
Description TACACS accounting server.
You are not allowed to assign the same IP address to both primary and secondary
accounting servers.
You can configure only one secondary accounting server in a HWTACACS scheme. If
you repeatedly use this command, the latest configuration replaces the previous one.
You can remove an accounting server only when it is not being used by any active TCP
connections.