Command Reference Guide

274 ● secondary accounting 3Com Router 5000 Family and Router 6000 Family
Command Reference
secondary accounting
Purpose Use the secondary accounting command to configure the IP address and port
number for the secondary RADIUS accounting server.
Use the
undo secondary accounting command to restore the IP address and
port number to the defaults.
Syntax secondary accounting ip-address [ port-number ]
undo secondary accounting
Parameters ip-address
IP address, in dotted decimal format. By default, the IP
address of secondary accounting server is at 0.0.0.0.
port-number
Specifies the UDP port number. Valid values are 1 to
65535.
If no value is specified, the default accounting service is
provided through UDP 1813.
Example Set the IP address of the secondary accounting server of RADIUS scheme, 3Com, to
10.110.1.1 and the UDP port 1813 to provide RADIUS accounting service.
[3Com-radius-3Com] secondary accounting 10.110.1.1 1813
View This command can be used in the following views:
■ RADIUS view
Description For detailed information, refer to the description of the primary accounting
command.
Related Commands ■ radius scheme
■ state