Command Reference Guide

3Com Router 5000 Family and Router 6000 Family root-certificate fingerprint ● 255
Command Reference
root-certificate fingerprint
Purpose Use the root-certificate fingerprint command to configure the
fingerprint for authenticating the CA root certificate.
Use the undo root-certificate fingerprint command to delete the
fingerprint for authenticating the CA root certificate.
Syntax root-certificate fingerprint { md5 | sha1 } string
undo root-certificate fingerprint
Parameters md5
Specifies to use an MD5 fingerprint.
sha1
Specifies to use an SHA1 fingerprint.
string
Fingerprint to be used. For an MD5 fingerprint, it must
consist of 32 characters and be entered in hexadecimal
format. For an SHA1 fingerprint, it must consist of 40
characters and be entered in hexadecimal format.
Default By default, no fingerprint is configured for authenticating the CA root certificate.
Example Configure an MD5 fingerprint for authenticating the CA root certificate.
[3ComCA-pki-domain-1] root-certificate fingerprint md5
12EF53FA355CD23E12EF53FA355CD23E
Configure an SHA1 fingerprint for authenticating the CA root certificate.
[3ComCA-pki-domain-1] root-certificate fingerprint sha1
D1526110AAD7527FB093ED7FC037B0B3CDDDAD93
View This command can be used in the following views:
■ PKI Domain view