Command Reference Guide

3Com Router 5000 Family and Router 6000 Family retry stop-accounting ● 253
Command Reference
retry stop-accounting
Purpose Use the retry stop-accounting command to configure the maximal
retransmission times after stop-accounting request.
Use the undo retry stop-accounting command to restore the retransmission
times to the default value.
Syntax retry stop-accounting retry-times
undo retry stop-accounting
Parameters retry-times
Specifies the maximal retransmission times after
stop-accounting request. Valid values are 10 to 65535.
If no value is specified, the default value is 500.
Example Indicate that, when stop-accounting request for the server in the RADIUS scheme
“3Com”, the router system will retransmit the packets for up to 1000 times.
[3Com-radius-3Com] retry stop-accounting 1000
View This command can be used in the following views:
■ RADIUS view
Description Because the stop-accounting request concerns account balance and will affect the
amount of charge, which is very important for both the user and ISP, NAS shall make
its best effort to send the message to RADIUS accounting server. Accordingly, if the
message from the router to RADIUS accounting server has not been responded, the
router shall save it in the local buffer and retransmit it until the server responds or
discard the messages after transmitting for specified times.
Related Commands ■ display stop-accounting-buffer
■ radius scheme
■ reset stop-accounting-buffer